Newswise — WASHINGTON, D.C., November 14, 2017 -- In motors, generators and similar electric machines, the electrical current that powers them generates magnetic fields that magnetize some of the metallic components. 

Choosing the right magnetic material is crucial for designing efficient machines, so researchers from the Institute of Electrical Machines (IEM) at RWTH Aachen University in Germany analyzed the existing system for characterizing soft magnetic materials, which are easily magnetized. To identify a better system for quality control, they looked at several factors that can affect the uncertainty inherent in the measurement of magnetic properties. Their results are published this week in the AIP Advances, from AIP Publishing

One example of a soft magnetic material manufacturers use to make generators, electric motors and transformers is low carbon steel. Generally, these materials serve the purpose of guiding and amplifying the magnetic flux when converting between mechanical and electrical energy in these machines. Magnetic measurements allow manufacturers to characterize those materials and to calculate how much power will be lost due to the magnetization process. 

“Manufacturing processes such as the cutting of the steel lamination influence the behavior of the soft magnetic material,” said Silas Elfgen of RWTH Aachen University. “Therefore such influence has to be measured and we must be able to model such parasitic effects.” 

Standardized methods for evaluating magnetic properties exist, but the researchers found them to be inadequate for applications such as designing traction drives in vehicles. They used one of the standard testing instruments, called a single sheet tester, to characterize soft magnetic materials across a range of frequencies and magnetic flux densities. 

Their tests showed that the currently used parameters describing measurement qualities are not sufficient for accurately evaluating uncertainties that arise at frequencies and magnetization levels of some applications currently of interest. They also looked at additional factors that influence the characterization and measured how much each parameter contributes to the uncertainty. They propose that these uncertainties can guide the selection of the most appropriate soft magnetic material for a specific electrical machine. 

“These analyses can be used by everyone working with magnetic characteristics and magnetic model parameters,” Elfgen said. “Further, it can be used in quality assurance of a product to define production features.” 

### 

The article, "Characterisation of soft magnetic materials by measurement: Evaluation of uncertainties up to 1.8 T and 9 kHz," is authored by Silas Elfgen, David Franck and Kay Hameyer. The article will appear in AIP Advances Nov. 14, 2017 (DOI: 10.1063/1.4993294). After that date, it can be accessed at http://aip.scitation.org/doi/full/10.1063/1.4993294

ABOUT THE JOURNAL 

AIP Advances is a fully open access, online-only, peer-reviewed journal. It covers all areas of applied physical sciences. With its advanced web 2.0 functionality, the journal puts relevant content and discussion tools in the hands of the community to shape the direction of the physical sciences. See http://aipadvances.aip.org

###