Newswise — In traditional vision systems, the optical information is captured by a frame-based digital camera, and then the digital signal is processed afterwards using machine-learning algorithms. In this scenario, a large amount of data (mostly redundant) has to be transferred from a standalone sensing elements to the processing units, which leads to high latency and power consumption. To address this problem, much effort has been devoted to developing an efficient approach, where some of the memory and computational tasks are offloaded to sensor elements that can perceive and process the optical signal simultaneously.

In a new paper published in Light Science & Application, a team of scientists, led by Professor Weida Hu from School of Physics and Optoelectronic Engineering, Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences, Hangzhou, China, State Key Laboratory of Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai, China, and co-workers have developed a non-volatile photo-memristor, in which the reconfigurable responsivity can be modulated by the charge and/or photon flux through it and further stored in the device. The non-volatile photo-memristor has a simple two-terminal architecture, in which photoexcited carriers and oxygen-related ions are coupled, leading to a displaced and pinched hysteresis in the current-voltage characteristics. For the first time, non-volatile photo-memristors implement computationally complete logic with photoresponse-stateful operations, for which the same photo-memristor serves as both a logic gate and memory, using photoresponse as a physical state variable instead of light, voltage and memresistance. Polarity reversal of photo-memristors shows great potential for in-memory sensing and computing with feature extraction and image recognition for neuromorphic vision.

The photo-memristor demonstrates tunable short-circuit current in a non-volatile mode under illumination. By mimicking the biological functionalities of the human retina and designing specific device structures, the devices can act as neural network for neuromorphic visual processing and implementation of completely photoresponse-stateful logic operations triggered by electrical and light stimuli together. It can support various kinds of sensing tasks with all-in-one sensing-memory-computing approaches. These scientists summarize the operational principle and feature of their device:
“We design a two-terminal device with MoS2-xOx and specific graphene for three purposes in one: (1) to provide low barrier energy for the migration of oxygen ions; (2) to perform as geometry-asymmetric metal–semiconductor–metal van der Waals heterostructures with multi-photoresponse states; and (3) as an extension of a memristor, this device not only provides tunable conductance, but also demonstrates reconfigurable photoresponse for reading at zero bias voltage.”

“Moreover, the tunable short-circuit photocurrent and photoresponse can be increased to 889.8 nA and 98.8 mA/W, respectively, which are much higher than that of other reconfigurable phototransistors based on 2D materials. To reverse the channel polarity and obtain a gate-tunable short-circuit photocurrent, the channel semiconductor must be thin enough. Thus, it is difficult to use the thick film needed to absorb enough light to get a large signal. In our case, the mechanism of the two-terminal device rearrangement is based on ion migration, which is not limited by the thickness. We can increase the thickness of the film to absorb more photons and get a large short-circuit photocurrent.” they added.

“This new concept of a two-terminal photo-memristor not only enables all-in-one sensing-memory-computing approaches for neuromorphic vision hardware, but also brings great convenience for high-density integration.” the scientists forecast.

###

References

DOI
10.1038/s41377-023-01079-5

Original Source URL
https://doi.org/10.1038/s41377-023-01079-5

Funding information
This work was financially supported by the National Natural Science Foundation of China (Grant Nos. 62261136552, 62005303, 62134001, 62104053, 61973294), National Key Research and Development Program of China (Grant No. 2021YFA0715602)

About Light: Science & Applications
The Light: Science & Applications will primarily publish new research results in cutting-edge and emerging topics in optics and photonics, as well as covering traditional topics in optical engineering. The journal will publish original articles and reviews that are of high quality, high interest and far-reaching consequence.

Journal Link: Light: Science & Applications

MEDIA CONTACT
Register for reporter access to contact details
Newswise: An extension of the memristive system: from tunable conductance to reconfigurable photoresponse

Credit: Light: Science & Applications

Caption: Figure 1| Conceptual graph of all-in-one sensing-memory-computing approaches.

Newswise: An extension of the memristive system: from tunable conductance to reconfigurable photoresponse

Credit: Light: Science & Applications

Caption: a, I-V characteristic of a G/M/G device with binary photoresponse switching when the voltage sweeps from 0 to 2 V, from 2 V to -2 V, and back to 0 V. b, Correlation of changes in the ratio of the intensities of Raman scattering and shifts of the G mode of graphene electrodes and states of the non-volatile photoresponse. c, TCAD-simulated dark/photo current of the G/M/G device for LPS, TCAD-simulated electron current densities distribution of low photoresponse state under illumination. d, TCAD-simulated dark/photo current of the G/M/G device for high photoresponse state, TCAD-simulated electron current densities distribution of LPS under illumination.

Newswise: An extension of the memristive system: from tunable conductance to reconfigurable photoresponse

Credit: Light: Science & Applications

Caption: a, Single-layer perceptron (SLP) neural network architecture schematics and the accuracy of the SLP classifier during training with floating-point weight and discrepant 7-level photoresponse state. b, Illustration of an in-memory IMP operation based on a set of photomemristors triggered by light stimuli. c, Diagram of the optical and electrical pulses applied for the IMP operation. The blue and red curves show the optical and electrical signal of devices p and q before and during the IMP operation, and the orange curves show the change in photoresponse states after IMP operations, reproducing the IMP truth table.

CITATIONS

Light: Science & Applications

Download PDF
16920907131941_s41377-023-01079-5.pdf