Newswise — Researchers in Korea have united to tackle the challenges in the commercialization of all-solid-state batteries. Dr. Yoon-Cheol Ha from the Next Generation Battery Research Center of KERI collaborated with a team led by professor Byung Gon Kim of Department of Applied Chemistry, Kyung Hee University, a team led by professor Janghyuk Moon of School of Energy Systems Engineering, Chung-Ang University, and a team led by professor Seung-kKiSeoung-Ki Lee of School of Materials Science and Engineering, Pusan National University h to develop a technology to optimally mix cathode materials for all-solid-state batteries with sulfide solid electrolytes.
All-solid-state batteries are gaining attention as a next-generation battery technology due to their extremely low risk of fire or explosion. However, they require significantly more advanced technology compared to conventional batteries based on liquid electrolytes, given the solid characteristics of the all-solid-state battery, making manufacturing more challenging. In particular, the effective mixture and dispersion of cathode active materials with solid electrolytes, conductive additives, and binders* are known to be among the challenges in manufacturing a composite electrode. Stringent conditions must be met, such as creating channels (pathways) that facilitate the efficient transfer of electrons and lithium ions and ensuring low interfacial resistance on the cathode-electrolyte interfaces.
* Conductive additives are materials that facilitate the movement of electrons in the active material. A binder is a type of adhesive substance that helps the active material and conductive additive adhere well to the metal plate (current collector).
Up until now, two main methods have been used to mix cathode materials and solid electrolytes: ▲ simply mixing them mechanically in wet or dry conditions to make the thickness of tens to hundreds of micrometers (one millionth of a meter), or ▲ using the core-shell structure method, where the surface of cathode materials is wrapped with solid electrolyte. However, these existing methods have faced challenges in ensuring movement of electrons or ions and in forming a low-resistance interface.
In order to resolve the issue, KERI and university research teams utilized the method of partially coating the cathode active materials with solid electrolyte. Since sulfice solid electrolyte is sensitive to oxygen and moisture and can deteriorate if misused, the research team developed a blade mill-a special equipment that can utilize inert gases that do not cause chemical reactions. This allowed them to study various types of solid electrolyte coating structures and test and verify the optimal mixture ratio and process conditions with cathode active materials.
The team conducted various simulations to gather extensive data demonstrating the improvement of the active material utilization (actual capacity compared to theoretical capacity) and rate capability (fast charging/discharging compared to low current charging/discharging). They then applied the result to a prototype (pouch cell) to verify the performance of all-solid-state battery.
The research was published in Energy Storage Materials, a leading international journal in the field of energy. The journal has a JCR Impact Factor of 18.9, placing it in the top 5% of the field.
Dr. Yoon-Cheol Ha said, “For the widespread adoption of all-solid-state batteries, it is important to enhance the performance and reduce the cost of the solid electrolyte itself. However, structural design and manufacturing process technologies that effectively create a composite electrode to facilitate the smooth flow of ions and electrons effectively are also important.” He added, “By using a composite material where the cathode active material is partially coated with solid electrolyte at an optimal ratio, we can enhance the functionality of the electrode and significantly improve the performance of all-solid-state batteries.”
KERI, which has secured patents related to the technology, plans to find potential customers and pursue commercialization, believing that the achievement will attract significant attention from manufacturers of materials and equipment for all-solid-state batteries.
<KERI is a government-funded research institute under the National Research Council of Science and Technology of the Ministry of Science and ICT.>
MEDIA CONTACT
Register for reporter access to contact detailsArticle Multimedia
![Newswise: KERI advances in cathode composite design for sulfide-based all-solid-state batteries](/legacy/image.php?image=%2Fimages%2Fuploads%2F2024%2F07%2F26%2F66a369b3189f0_F1.jpg&time=09:19:01pm)
Credit: Korea Electrotechnology Research Institute
Caption: Research team, from left to right: Dr. Yoon-Cheol Ha (KERI), Professor Byung Gon Kim (Kyung Hee University), Chung-Ang University Professor Janghyuk Moon (Chung-Ang University), Pusan National University and Professor Seoung-Ki Lee (Pusan National University)
![Newswise: KERI advances in cathode composite design for sulfide-based all-solid-state batteries](/legacy/image.php?image=%2Fimages%2Fuploads%2F2024%2F07%2F26%2F66a369b657a07_F2.jpg&time=09:19:01pm)
Credit: Korea Electrotechnology Research Institute
Caption: KERI researchers, including Dr. Yoon-Cheol Ha (far left), pose in front of the 'blade mill' equipment used for the optimal design of cathode composite materials for all-solid-state batteries.
![Newswise: KERI advances in cathode composite design for sulfide-based all-solid-state batteries](/legacy/image.php?image=%2Fimages%2Fuploads%2F2024%2F07%2F26%2F66a369b9e1b27_F3.jpg&time=09:19:01pm)
Credit: Korea Electrotechnology Research Institute
Caption: KERI’s all-solid-state battery with improved performance due to the optimal design of cathode composite materials
![Newswise: KERI advances in cathode composite design for sulfide-based all-solid-state batteries](/legacy/image.php?image=%2Fimages%2Fuploads%2F2024%2F07%2F26%2F66a369bcef0df_F4.jpg&time=09:19:01pm)
Credit: Korea Electrotechnology Research Institute
Caption: Schematic illustration of electrode structures (optimal mechanical mixing vs. simple hand mixing) and comparison of the cell performance