Newswise — NORMAN, Okla. – Catalytic research led by University of Oklahoma researcher Steven Crossley has developed a new and more definitive way to determine the active site in a complex catalyst. His team’s research was recently published in Nature Communications.
Catalysts consisting of metal particles supported on reducible oxides show promising performance for a variety of current and emerging industrial reactions, such as the production of renewable fuels and chemicals. Although the beneficial results of the new materials are evident, identifying the cause of the catalytic activity can be challenging. Catalysts often are discovered and optimized by trial and error, making it difficult to decouple the numerous possibilities. This can lead to decisions based on speculative or indirect evidence.
“When placing the metal on the active support, the catalytic activity and selectivity are much better than the combined performance of metal with the support alone,” explained Crossley, a chemical engineer, Teigen Presidential Professor and Sam A. Wilson Professor within the Gallogly College of Engineering. “The challenge is when you put the two components together, it is difficult to understand the cause of the promising performance.” Understanding the nature of the catalytic active site is critical for controlling a catalyst’s activity and selectivity.
Crossley’s novel method of separating active sites, while maintaining the ability of the metal to create potential active sites on the support, uses vertically grown carbon nanotubes that act as “hydrogen highways.” To determine if the catalytic activity was from either direct contact between the support and the metal or from metal-induced promoter effects on the oxide support, Crossley’s team separated the metal palladium from the oxide catalyst titanium by a controlled distance on a conductive bridge of carbon nanotubes. The researchers introduced hydrogen to the system and verified that hydrogen was able to migrate along the nanotubes to create new potential active sites on the oxide support. They then tested the catalytic activity of these materials and contrasted it with the activity of the same materials when the metal and the support were in direct physical contact.
“In three experiments, we were able to rule out different scenarios and prove that it is necessary to have physical contact between the palladium and titanium to produce methyl furan under these conditions,” Crossley said.
The carbon nanotube hydrogen highways can be used with a variety of different bifunctional catalysts.
“Using this straightforward and simple method, we can better understand how these complex materials work, and use this information to make better catalysts,” Crossley said.
Crossley and his OU team are working in collaboration with Jeff Miller, a chemical engineering professor at Purdue University. This work was supported by the National Science Foundation CAREER award 165393.
RSS