A graphical representation of the type of X-ray imaging setup that could employ the new colloidal quantum shell-based scintillation technology.
Newswise — Scintillators are detectors that make high-energy X-rays or particles visible through flashes of light to form an image. Their many applications include particle physics, medical imaging, X-ray security and more.
Despite their usefulness, however, scintillators have presented researchers with a conundrum. Until recently, scientists had to decide whether fast imaging or optimal performance was more important when choosing the appropriate scintillator technology for a particular experiment.
Scientists at the U.S. Department of Energy’s (DOE) Argonne National Laboratory may have found a way to resolve this dilemma. It involves a scintillator material composed of spherical particles that are 20 billionths of a meter in size. Even though they are incredibly small, these nanoparticles have an intricate structure composed of a ball-like core of cadmium sulfide surrounded by a thin shell of cadmium selenide and a thicker shell of cadmium sulfide. Collaborating on this project were scientists from DOE’s Oak Ridge National Laboratory, Bowling Green State University (BGSU) and Northwestern University.
“The quantum shell scintillator achieves a single-digit nanosecond lifetime while preserving efficiency levels equal to traditional scintillators, which makes them better suited to a wider range of uses.” — Benjamin Diroll, Center for Nanoscale Materials
Due to quantum mechanical effects, these nanoparticles have valuable optical and electronic properties not possible with larger particles. The BGSU scientists synthesized these nanoparticles, called quantum shells, to form a close-knit lattice that constituted the scintillator material. It is applicable to ultrafast radiation detection as well as the high-resolution imaging possible with X-ray light sources, such as the Advanced Photon Source (APS) at Argonne, a DOE Office of Science user facility.
An everyday application for scintillator technology can be found in a dentist’s office, where X-ray beams are shone through a patient’s mouth and onto a film of a reactive material that imprints an image of the teeth for the dentist to check for potential defects. Although this kind of imaging is useful for dentists or doctors doing chest X-rays, it is a far cry from the power and precision needed for the nanoscale imaging such as that performed at the APS. That requires scintillator materials that are efficient, quick to respond, have great spatial resolution, are durable, and can be scaled to large sizes.
The research team’s recently developed quantum shells meet those criteria. “Quantum shells may be suitable for imaging in the dentist’s office, but they are much more well-suited for scintillators at a light source like the APS or for X-ray imaging of engines while they are running with liquids inside,” said Burak Guzelturk, a physicist in Argonne’s X-Ray Science Division.
“When traditional scintillators are excited by X-ray beams, they will emit light, and it will have some characteristic lifespan,” said Benjamin Diroll, a scientist in the Center for Nanoscale Materials, a DOE Office of Science user facility at Argonne. “In some of them, it might be hundreds of nanoseconds, or it might be microseconds. The quantum shell scintillator achieves a single-digit nanosecond lifetime while preserving efficiency levels equal to traditional scintillators.”
Guzelturk compared quantum shells with another similar light-emitting material, quantum dots. “In a quantum dot, the light emission typically comes from the center part of the nano-object, and the color of light emitted depends on its size. On the other hand, in the quantum shells, the light emission does not originate from the core, but it’s actually the adjacent shell in the nanoparticle.” The thickness of that shell determines how light is emitted. Scintillator material produced from quantum shells can deliver quick, well-defined imaging and long-term durability.
Classical scintillators tend to be quite thick. As a result, they can light up at the front or back or in the middle, which tends to blur the desired image. Quantum shell scintillators avoid that problem because they can be made as a thin film on a substrate material.
“Commercial scintillators that are made of lighter elements need to be millimeters thick,” explained Guzelturk. “In our case, we realized that we could make quantum shell scintillators much thinner, just a couple of micrometers, while achieving both strong X-ray absorption and high spatial resolution imaging.”
With the advent of quantum shell scintillators for high-resolution and ultrafast imaging, scientists are able to bypass the limitations of traditional scintillator technology. This pioneering work showcases the remarkable potential of these nanoscale quantum materials. By leveraging their unique optical and electronic properties, researchers can open new frontiers in fields ranging from particle physics to medical diagnostics.
This research first appeared in Nature Communications. In addition to Diroll and Guzelturk, the paper’s authors include James Cassidy, Dulanjan Harankahage, Muchuan Hua, Xiao-Min Lin, Vasudevan Iyer, Richard D. Schaller, Benjamin J. Lawrie and Mikhail Zamkov.
The research was funded by the DOE Office of Basic Energy Sciences.
About Argonne’s Center for Nanoscale Materials
The Center for Nanoscale Materials is one of the five DOE Nanoscale Science Research Centers, premier national user facilities for interdisciplinary research at the nanoscale supported by the DOE Office of Science. Together the NSRCs comprise a suite of complementary facilities that provide researchers with state-of-the-art capabilities to fabricate, process, characterize and model nanoscale materials, and constitute the largest infrastructure investment of the National Nanotechnology Initiative. The NSRCs are located at DOE’s Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, Sandia and Los Alamos National Laboratories. For more information about the DOE NSRCs, please visit https://science.osti.gov/User-Facilities/User-Facilities-at-a-Glance.
About the Advanced Photon Source
The U. S. Department of Energy Office of Science’s Advanced Photon Source (APS) at Argonne National Laboratory is one of the world’s most productive X-ray light source facilities. The APS provides high-brightness X-ray beams to a diverse community of researchers in materials science, chemistry, condensed matter physics, the life and environmental sciences, and applied research. These X-rays are ideally suited for explorations of materials and biological structures; elemental distribution; chemical, magnetic, electronic states; and a wide range of technologically important engineering systems from batteries to fuel injector sprays, all of which are the foundations of our nation’s economic, technological, and physical well-being. Each year, more than 5,000 researchers use the APS to produce over 2,000 publications detailing impactful discoveries, and solve more vital biological protein structures than users of any other X-ray light source research facility. APS scientists and engineers innovate technology that is at the heart of advancing accelerator and light-source operations. This includes the insertion devices that produce extreme-brightness X-rays prized by researchers, lenses that focus the X-rays down to a few nanometers, instrumentation that maximizes the way the X-rays interact with samples being studied, and software that gathers and manages the massive quantity of data resulting from discovery research at the APS.
This research used resources of the Advanced Photon Source, a U.S. DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
Argonne National Laboratory seeks solutions to pressing national problems in science and technology by conducting leading-edge basic and applied research in virtually every scientific discipline. Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy’s Office of Science.
The U.S. Department of Energy’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit https://energy.gov/science.
RSS