U.S. Department of Energy awards Argonne National Laboratory $4 million for energy-efficient microchip research

Newswise — While the microchips inside electronic devices like cell phones and computers are incredibly small, transistors — the tiny electrical switches inside of microchips — are approaching the atomic level. Today’s microchips pack over 100 million transistors in an area the size of a pin head.

Despite their almost unimaginable size, the total number of such microelectronic devices consume an enormous amount of energy, which is growing exponentially. Predictions indicate that 20% of the world’s energy could be consumed by microelectronics by 2030.

“It is only recently that microelectronics started using a large fraction of the Earth’s electricity. This is an urgent problem. The Department of Energy is committed to finding energy-efficient solutions that will flatten the demand curve for electricity use by microelectronics.” — Jeffrey Elam, director, Argonne’s Atomic Layer Deposition research program

Averting this crisis hinges on developing new transistors, materials and manufacturing processes to create ultra-low-energy microchips. Recently, the U.S. Department of Energy (DOE) awarded DOE’s Argonne National Laboratory $4 million to fund research that will use atomic layer deposition (ALD) to advance new materials and devices for creating microchips that use up to 50 times less energy than current chips.

Set to launch in early 2024, the project — which will last two and a half years — is funded by the Energy Efficient Scaling for Two Decades (EES2) program of the DOE’s Advanced Materials and Manufacturing Technologies Office. Argonne will partner with Stanford University, Northwestern University and Boise State University on the project. Argonne Distinguished Fellow Jeffrey Elam, who founded and directs Argonne’s groundbreaking ALD research program, will lead the research team.

“It is only recently that microelectronics started using a large fraction of the Earth’s electricity,” said Elam. ​“This is an urgent problem. DOE is committed to finding energy-efficient solutions that will flatten the demand curve for electricity use by microelectronics.”

Advanced technology, including the artificial intelligence (AI) explosion, is speeding up the pace at which energy is used in computing. AI applications analyze massive amounts of data and consume large amounts of electricity. As AI becomes widespread, enormous data centers that power those applications will face significant energy increases. The proliferation of ​“smart” devices and their data requirements also increase electricity use.

“Computers today spend over 90% of their energy shuttling data back-and-forth between the memory and logic functions, which exist on separate chips,” Elam said. ​“This limitation is known as the ​‘von Neumann bottleneck.’ Energy used to move the data is wasted as heat. As computing demand grows, we must develop low-power transistors and microchips to overcome this bottleneck and prevent an energy crisis.”

The project grew from Argonne’s Laboratory Directed Research and Development Program activities and a project funded by the DOE’s Office of Science. Threadwork is a research program that applies co-design to develop neuromorphic devices and terahertz interconnects that will enable high-performance detectors for high energy physics and nuclear physics.

Using atomic layer deposition to redesign the microchip 

Argonne is a pioneer in ALD, a thin-film deposition technique used extensively in microelectronics manufacturing. ALD produces extremely thin layers — only one-atom thick — to make microelectronics with great precision. These films are considered 2D since they have length and width, but essentially no thickness. A wide variety of thin films can be prepared by ALD on complex, 3D substrates.

“Atomic layer deposition is an ideal technology for fabricating ultra-low power electronics,” said Elam, an ALD researcher for more than 20 years. This makes ALD attractive for uses including lithium-ion batteries, solar cells, catalysts and detectors.

In this project, Argonne scientists will use ALD to redesign the microchip and eliminate the back-and-forth shuffling of data. Scientists want to close the gap between the microprocessor, or ​“brain,” and the memory chips. 3D integrated circuits can stack the memory and logic layers on top of each other, pancake-style. This could potentially reduce energy usage by 90%.

Currently, silicon is the semiconducting material used to make memory chips and microprocessors, but the 3D integration necessary to stack the layers is extremely difficult to achieve with silicon. Semiconductors control electric currents.

To overcome this limitation, researchers are developing an alternative, 2D semiconducting material, molybdenum disulfide (MoS₂), to replace silicon. Building on previous research, Argonne scientists are using ALD to create atomically precise MoS₂ films. ​“We can create extremely thin, 2D MoS₂ sheets. These sheets will replace the bulky, 3D silicon thin films used in today’s transistors. This leaves more room on the microchip to effectively stack the memory and logic together, dramatically reducing energy,” Elam said.

New electronic devices increase energy efficiency 

Argonne, in collaboration with Boise State University, developed ALD methods for creating 2D MoS₂ films. The team will demonstrate the use of MoS₂ to create 2D semiconductor field effect transistors (2D-FETs) that can be stacked in 3D. FETs are conventional transistors but are based on 2D rather than 3D materials. This method allows the integration of memory and logic functions not possible with silicon.

Simultaneously, Argonne scientists are demonstrating the use of ALD MoS₂ in memtransistors, electronic components used to build neuromorphic circuits. Neuromorphic circuits mimic connections between neurons in the brain to create microchips that use significantly less energy. This technology is relatively new. But neuromorphic circuits have the potential to use one million times less energy compared to conventional silicon devices.

Both 2D-FETs and memtransitors have been successfully demonstrated at the lab scale by growing MoS₂ at high temperatures. Argonne scientists want to take the technology to the next level. Commercial manufacturing will require MoS₂ to be deposited on large, pizza-sized wafers at low temperatures. In this DOE project, the research team will develop these capabilities to ensure that the MoS₂ ALD is compatible with current semiconductor manufacturing processes. This is crucial to accelerating the integration of this technology into future semiconductors.

Scientists at the partner institutions will use their unique expertise to advance specific areas of the project. Professor Eric Pop at Stanford University will develop 2D-FET devices, Professor Mark Hersam at Northwestern University will develop memtransistors that utilize the ALD MoS_2, and Professor Elton Graugnard at Boise State University will perform advanced characterization of the ALD MoS₂ coatings to evaluate the quality of materials.

In parallel with the experimental work, Argonne is using modeling and simulation to design energy-efficient devices that incorporate ALD MoS₂. This work will leverage high performance computers at the Argonne Leadership Computing Facility, a DOE Office of Science user facility at Argonne, to model and simulate circuits integrating 2D materials. The computers will measure energy savings and benchmark their performance against current silicon technologies. Researchers seek to advance the stacked devices toward a pilot-scale demonstration, with the goal of marketing them for commercial use by the microelectronics industry. The project is a new facet of Argonne’s growing portfolio of research and development using ALD technology to address a wide variety of energy challenges.

The Argonne team also includes Physicist Moinuddin Ahmed, Principal Materials Scientist Angel Yanguas-Gil, Computer Scientist Xingfu Wu, Assistant Computer Scientist Sandeep Madireddy and Senior Materials scientist Anil Mane. The project builds on Argonne’s extensive work advancing the science and technology to create the next generation of microelectronics. Along with innovations in energy-efficient microelectronics and architectures, scientists are developing new approaches to energy-efficient and environment-friendly manufacturing for microelectronics.

The Argonne Leadership Computing Facility provides supercomputing capabilities to the scientific and engineering community to advance fundamental discovery and understanding in a broad range of disciplines. Supported by the U.S. Department of Energy’s (DOE’s) Office of Science, Advanced Scientific Computing Research (ASCR) program, the ALCF is one of two DOE Leadership Computing Facilities in the nation dedicated to open science.

Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation’s first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America’s scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy’s Office of Science.

The U.S. Department of Energy’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit https://​ener​gy​.gov/​s​c​ience.